Dell Inspiron 630m Optical Drive Installation Guide
NOTE: You do not need to install the device security screw unless you want to prevent the optical drive from being easily removed.
Your Dell™ computer ships with a CD/DVD drive installed in the optical drive bay along with an M2.5 x 8-mm device security screw. If the security screw is not already installed, it will be packaged separately. When you insert a drive into the bay, you can install the device security screw to prevent the drive from being easily removed.
Removing the Optical Drive;CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent damage to optical drives and other devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. Follow the instructions in
General Safety Guidelines for Working with Notebook Computers. 2. Use a Phillips screwdriver to remove the M2.5 x 8-mm device security screw, if installed, from the indention in the bottom of the computer.
3. Insert the screwdriver into the indention and push the notch on the metal tab to release the drive from the bay.
4. Pull the drive out of the bay.
Replacing the Optical Drive;CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
General Safety Guidelines for Working with Notebook Computers. 2. Follow the instructions in Removing the Optical Drive.
3. Slide the new drive into the bay until it snaps securely into place.
4. Replace the M2.5 x 8-mm device security screw (optional).
