Optical Drive (CD-ROM/CD-RW/DVD-ROM/DVD +-RW Drive) Installation Guide for Compaq / HP nx7400, nx7410 Series notebook computers.
1. Follow the procedures in
General Safety Guidelines for Working with Notebook Computers. 2. Position the computer with the left side toward you.
3. Remove the Torx8 T8M2.5×4.0 screw <1> that secures the
optical drive to the computer.
4. Insert a flat-bladed driver into the slot <2> on the bottom of the computer and push the tab.
5. Remove the optical drive <3> from the computer.
6. If it is necessary to replace the optical drive bracket, remove the two Phillips PM2.0×3.0 screws <1> that secure the bracket to the optical drive.
7. Remove the optical drive bracket <2>.
Reverse the above procedure to reassemble and install an
optical drive.
