Hard Drive Installation Guide for Compaq Presario R4000 & HP Pavilion zv6000 series laptop computers.
1. Before you begin any removal or installation procedures:
(1).Shut down the notebook.
If you are unsure whether the notebook is off or in hibernation, turn the notebook on, and then
shut it down through the operating system.
(2).Disconnect all external devices connected
to the notebook.
(3).Disconnect the power cord.
2.Loosen the two PM2.0×7.0 screws (1) that secure the hard drive cover to the notebook.
3.Lift the left side of the cover (2) up and swing it to the right.
4.Remove the hard drive cover.
5.Remove the two PM2.0×7.0 hard drive retention screws (1) that secure the hard drive to the notebook.
6.Slide the hard drive (2) to the right to disconnect it from the system board.
7.Lift the hard drive (3) straight up and remove it from the hard drive bay.
8.Remove the four PM3.0×4.5 screws (1) that secure the hard drive frame to the hard drive.
9.Lift the frame (2) to remove if from the hard drive.
Reverse the above procedure to reassemble and install the hard drive.
