Dual-polarity Output Cables & Connectors for PM85 & PM86 Batteries
Included with the Dual-Polarity Cables and Connectors pack are:
2 Output cables for PM85 and PM86 Series Batteries
8 connector tips that work with most digital cameras/video camcorders on the market.
This cables & connectors pack is for our PM85 and PM86 batteries like this:
PM85 Battery, Not included.
The cables and connectors may not work for other brand batteries or devices.
How to use this kit:
1. With the connector tips not connected to the output cords, locate the correct tip by fitting the tip into the device DC Jack. The tip should fit snugly in the DC jack
2. Set Polarity
& Plug the tip
After you have selected the proper plug tip, you need to connect the plug tip to the adapter cord to match the correct polarity setting. It is CRITICAL that you determine and set the correct polarity needed for your product before using the adapter. FAILURE TO DO SO MAY RESULT IN SEVERE DAMAGE TO YOUR PRODUCT!
To determine the correct polarity for your product, inspect the DC adapter jack or the label of your product thoroughly for information about the products polarity. There will be a symbol with a plus sign on one side and a minus sign on the other with a circle between them. The circle will have an opening so that it looks like a "C". If the opening of the circle is on the side with the plus sign the polarity is positive. If the opening is on the side with minus sign the polarity is negative. If you cannot find a polarity sign on your product you need to call the product's manufacturer to find out what the polarity is.
There is a small plus (+) and minus (-)sign on the plastic part of the plug tip above the two pins where you plug the tip into the cord. On the adapter's cord where you connect the plug tip - you should notice the word "tip".
If your polarity setting is POSITIVE, you need to set the plug tip to "tip positive" by connecting the "plus sign" and the word "tip" on the adapter cord so they line up on the same side. Most laptops polarity setting is Positive like bellow picture:
If your device polarity setting is NEGATIVE, you need tip to set the plug tip to "tip-negative" by connecting the "minus sign" and the word "tip" on the adapter cord so they line up on the same side.
3. After you have selected the proper connector tip & decided correct polarity setting, you need to connect the tip to the battery output cord. Then connect the output cord to battery output port.
