36V High Capacity Lithium Ion Battery for electric bicycles and other devices that require high power.
This battery is for using with
500W or less power motor. If your e-bike motor needs more than 500W power, this battery may not work because it can not supply enough power.
High Capacity: 36V 11.6Ah (418 Watt-hour)
Light Weight: only around 5 pound.
Small Size: 7" x 5" X 3.8", easy to fit on many different place on bike.
Very Powerful: continuous output up to 400W ~ 500W, maximum burst output up to 500W.
High Quality: Made with high quality Panasonic Lithium Ion cells.
High Durability: Water-resistant and firm ABS plastic casing. The internal pack is stabilized by braces that can avoiding mechanical accidents caused by vibration.
High Safety: Built-in PCB protection to prevent short circuit, over-current, over-heat, over-charge, over-discharge.
|
1
|
4-Level LED indicator
|
|
2
|
15A Fuse
|
|
3
|
Power on/off
|
|
4
|
Handlebar
|
|
5
|
Battery contact socket
|
|
6
|
Charging input jack
|
|
Output Voltage: 30V ~ 42V, Nominal Voltage: 36V;
Maximum Continuous Output Current: 15A (Maximum Continuous Output Power: 450W ~ 500W);
Maximum Burst Output Power ( up to 10 minutes) Current: 18A
Features:
Safety Equipment
- - Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
Specifications:
|
Model No.
|
|
|
Cell Brand
|
|
|
|
|
Chemistry
|
|
|
Voltage
|
- Nominal Voltage: 36 V
- Minimum Voltage: 30V
- Maximum Voltage: 42.55V
|
|
|
|
Capacity Rate
|
- 36V 11.6Ah (or 418 Watt-hour)
|
|
|
|
|
|
Charge Voltage Limit
|
|
|
Max. Charge Current
|
|
|
Continuous Discharge Current
|
|
Burst Discharge Current
(up to 10 minutes)
|
|
|
Size
|
- 180.00 x 123.00 x 92.00 mm
- ( or 7" x 5" X 3.8")
|
|
Weight
|
|
|
Operate Temp. Charge
|
|
|
Operate Temp. Discharge
|
|
|
Storage Temp.
|
|
|
Cycle Life
|
|
|
PCB Safety Function
|
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
Small Size and Light Weight:This battery weight is only around
5.1 pounds (same capacity Lead-Acid battery would be around 30 pound).
Benefits of Using Lithium-ion batteries:
Using Lithium-ion battery offers many advantages over older SLA (Sealed Lead Acid) battery because of Lithium-ion battery's high energy density, small size, and low weight. A typical Lithium-ion battery may only has
1/4 of the weight and
1/2 of the size compared to same capacity traditional heavy bulky Sealed Lead Acid battery.
BiXPower Lithium-ion batteries are made with premium brand Lithium-ion battery cells. We have some of the lightest and most powerful replacement batteries available with top quality. Compare to lead-acid batteries, BiXPower Lithium ion batteries have a much slower self-discharge than the best lead acid batteries. This means that they can still work even if the remaining capacity is low. A fully charged BiXPower Lithium ion battery can sit for a year or more and still retain adequate capacity, without damaging the battery.
No explosive gasses during charge, no lead, no acid, environmentally friendly.
|
Battery Type
|
Lithium ion Battery
|
Lead Acid Battery
|
|
Voltage fluctuation in working
|
Remains stable with different output
|
Voltage fluctuation based on output
|
Cycle life
(Residual capacity over 5%)
|
500 ~1000 cycles
|
150~300 times
|
|
Capacity
|
Very stable and very little affection by output current
|
Suffer a big affection in by output current. Capacity will be much smaller than rated capacity when output current is large.
|
|
Depth Of Discharge (D.O.D.)
|
99%
|
50% ~ 60%
|
|
Self discharge rate (per month)
|
1~1.5% (Capacity remains over 80% even the battery is idled for one year)
|
30% (Battery capacity drops near to zero if it is unused for 3 months)
|
|
Fast charge capability
|
Charge to full capacity in about 6 hours
|
8 ~ 12 hours to fully charge the battery
|
|
Discharge working temperature ℃
|
-20～+60
|
-20～+55
|
|
Memory effective
|
None
|
None
|
|
Thermal stability
|
Outstanding
|
Acceptable
|
|
Weight (Compare to the same capacity)
|
1/4 of the weight compared to lead acid battery
|
comparatively heavier weight
|
|
Installation
|
Any direction
|
Upright position is necessary
|
|
Safety
|
Built-in safety protection function
|
Danger of acid leakage
|
Environmental conform-ability
|
Conforms to RoHs standard
|
Violates RoHs standard；Lead and sulphate acid are pollutant
|
|
Disposition of used battery
|
Lithium-ion batteries are
generally not considered an environmental hazard because they do not
contain lithium metal. The United States government labels them as
non-hazardous waste and does not oppose them being discarded together
with the trash that makes up the local waste stream.
|
Needs special recycling after treatment utility
|
Package Contents:The battery comes with a AC charger and output box. The AC charger can charge the battery from 100V ~ 240V AC power source.
KF562 Holder & Output Box can be
used as a battery holder and mount on the frame vertically or horizontally.
The battery then can slide on /off to the output box and locked with key. It is
designed for multi-direction installation. User can change the position of
battery (vertically / horizontally) by adjusting the clamp.
LED Display:
Safety Features:
- Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
|
The Four-level LED indicates current power status.
|
|
The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.
|
|
|
|
It is easy to hold the battery with the well designed handlebar.
|
|
Battery can be recharged either by fastening on the bike or by itself with the provided AC adapter.
|
|
|
|
The LED (at the power button controls on/off of the battery) glows when power is on.
|
|
The key lock is used to fix the battery onto the holder.
|
|
Battery Output Box can be welded on the bike vertically or horizontally.
|
|
The optional Output Box KF542 is designed for multi-direction installation. User can change the position of battery (vertically / horizontally) by adjusting the clamp.
|
|
Battery can be installed easily. Simply slide the battery towards the holder by following the track
.
|
|
|
Accessories:
1. AC Charger
- Size: 115.15 x 58.90 x 31.30 mm
- Input Voltage: 100-240 V
- Output Voltage: 42.5 V
- Output Current: 1.5 A
- Safety Requirements: CCC, CE
|
|
2. Power Cord 
American Type Adapter Power Cord, Length: 1000 mm
3. Output Box ( Model# KF561)
4. Optional Output Box (Model# KF562)
