Armada M700 Hard Drive Installation Guide


Compaq® M700

  • Compaq Armada M700 6366/13T/6.4, M700 6366/14T/6.4
  • Compaq Armada M700 6400/14T/10.0, M700 P3450/14T/6.0 PIII
  • Compaq Armada M700 P3500/14T/12.0 PIII
  • Compaq Armada M700 P3650 PIII SpeedStep (205859-006,-008)
  • Compaq Armada M700 P3650/14T PIII Speedstep (205515-002)
  • Compaq Armada M700 P3650/14T PIII SpeedStep (205858-002)
  • Compaq Armada M700 P3650/14T PIII Speedstep (205858-008)
  • Compaq Armada M700 P3650/14T PIII SpeedStep (205859-002)
  • Compaq Armada M700 P3700 PIII SpeedStep (205861-002,-008)
  • Compaq Armada M700 P3700 PIII SpeedStep (470006-990,-992)
  • Compaq Armada M700 P3700/14T PIII SpeedStep (205862-002)
  • Compaq Armada M700 P3700/14T PIII Speedstep (205862-008)
  • Compaq Armada M700 P3750/14T PIII Speedstep (206647-002)
  • Compaq Armada M700 P3750/14T PIII Speedstep (206647-008)
  • Compaq Armada M700 P3850/14T PIIISpeedStep(470006-421,422
  • Other M700 Models

    Hard Drive Installation Instructions

    1. Shut down the computer and remove Battery Pack and AC adapter.
    2. Locate Hard Drive compartment on the front panel, just left of the head phone jack.
    3. Turn Notebook upside down.
    4. Remove the one torx screw that is securing the hard drive. (A security screwdriver was provided with the computer.)
    5. Push down on the hard drive bezel on the front of the hard drive.
    6. Lift the bezel up 90 degrees to create a handle. Pull the hard drive out of the hard drive bay.
    7. Remove the 4 black screws at each corner and lift off the black tray.
    8. Gently remove the silver bracket and connector.
    9. Place connector on new hard drive.
    10. Place the black tray on the HDD. When looking at the hard drive with the label up, the black bezel goes along the left side of the hard drive.
    11. Replace the 4 black screws from step 7.
    12. With the hard drive bezel pulled down, slide the hard drive into the hard drive bay.
    13. Push up on the hard drive bezel to secure the hard drive in the bay.
    14. Secure the hard drive bay by replacing the screw from step 4.
    15. Replace the battery pack and all cables.




  • For more products and latest prices, please visit our main web site at www.BiXPower.com





    © Copyright 1993-2021, BiX International Inc. All Rights Reserved.