|  |
 |
Armada M300 Series Hard Drive Installation Guide |
 |
Compaq® M300
Compaq Armada M300 6333/11.3T/6.4
Compaq Armada M300 C333/11.3T/4.3 Celeron
Compaq Armada M300 C450/T11/6.0 Celeron
Compaq Armada M300 P3500/T11/6.0 PIII (165288-008)
Compaq Armada M300 P3600/T12/6.0 PIII (165288-002)
Compaq Armada M300 P3600/T12/6.0 PIII (180400-002)
Compaq Armada M300 P3600/T12/6.0 PIII (180400-008)
Compaq Armada M300 P3600/T12/6.0 PIII (180428-002)
Compaq Armada M300 P3600/T12/6.0 PIII (180428-008)
Hard Drive Installation Instructions
You will need a small Phillips screwdriver and a Torx
5
- Shut down the computer and remove Battery Pack and AC adapter.
- Locate Hard Drive compartment on the left panel.
- Turn Notebook upside down.
- Remove the one Phillips screw that is securing the hard drive. It is located
just underneath the picture of the lock.
- Pull up on the front bezel.
- Slide the hard drive out of the bay.
- Remove the 4 screws that are securing the tray to the hard drive.
- Gently remove the silver bracket and connector.
- Place connector and bracket on new hard drive.
- Place the four screws from step 7, to secure the hard drive to the tray.
- Pull the bottom half of the bezel down.
- Slide the hard drive into the bay until the connector is seated.
- Push the front bezel down.
- Secure the hard drive bay by replacing the screw from step 4.
- Replace the battery pack and all cables.
|